Fiber-Lite® Illuminators for Microscopy

 

LMI-6000 LED Fiber Optic Illuminator
Designed for microscopy and general illumination, this unit is energy efficient and features
 bright white LED lighting with a color temp of 6000K and higher output than the typical
150 watt halogen fiber optic illuminator. The LMI-6000 supports and fully illuminates
gooseneck and annular ring light fiber optics. Practically maintenance free the LMI-6000 requires
no lamps or fuses to fail, and no lamp sockets to wear out. The long life LED's of this unit
are able to provide 20,000 hours of light. (Specifications)
MI-150, MI-152, & MI-157 Illuminators
This unit offers safe and hassle-free operation and mates securely with standard MI-Series microscopy light guides, eliminating adapters. The MI-150 delivers 350,000 foot candles of
high-intensity, cold light illumination when coupled with any of our fiber optic light guides.
Standard MI-150 provides a lamp life of over 200 hours at full intensity. This unit is available separately or as part of a complete fiber optic illumination system.
(Specifications)

MI-150 Remote
Offering the same outstanding features and benefits of the MI-150, this unit is designed for
remote operation. Intensity and ON/OFF operation is controlled remotely via a 7 foot or 12 foot cable.  (Specifications)
MI-150 Ringlight Systems
Eliminating the clutter and heat radiation of conventional light sources, the MI-150 Ringlight
system is the ideal solution for applications where shadow-free illumination is required (Specifications)
MI-150 Gooseneck Systems
Ideal for applications that require a flexible light source, this unit features single or dual
gooseneck illuminators that allow the user to position the light source at designed angles. (Specifications)
  Model 180
A 150 Watt Quartz halogen illuminator that offers high intensity, cold illumination in a metal enclosure.  Designed for durability and the lowest possible audible noise and vibration levels,
this unit is compatible with all Fiber-Lite standard and custom fiber optic light guides and is
UL listed and CSA approved. (Adapters required with most fiber cables.) 
Model 180
Specifications
Model 181-1: Model 180 mated with Standard Dual Gooseneck illuminator. (Specifications)
Model 360-1 RL System: Model 180 mated with Ringlight. 
(Specifications)
  Fiber-Lite 170-D
Model MI-30
The MI30 offers the price-conscious buyer many of the features found in the MI150 with the
added benefit of a rugged, convection-cooled enclosure which results in zero noise and
vibration. This 30-watt, quarts halogen unit comes as a single gooseneck model and delivers
over 10,000 foot candles of intense, cold illumination. Easy lamp changes and a lifetime warranty round out this hardworking illumination system. (Specifications)

Shown: Model 190-1
(includes light guide)

Model 190
The Model 190-1 is a 30 Watt, quarts halogen illumination system capable of delivering over
10,000 foot candles of intense, cold illumination. The light source features a rugged, convention cooled enclosure which results in zero noise, vibration, or air particle generation, important
benefits in semiconductor and other microscopy applications. The 4 position, solid state, light intensity switch allows the selection of appropriate light levels and significantly increases lamp
life at lower settings. The system includes the BGT1826 Optic light guide and LH759 Focusing
Lens. Its rugged enclosure with hard mounting capability makes the Model 190-1 ideal for
industrial applications. (Specifications)

Shown: Model 3100-1
(includes light guide)

Model 3100 Gooseneck System
Our "Smallest" Illuminator
The Model 3100 is an economical, light weight, and compact 30 Watt quartz halogen illuminator
with a remote plug =-in-the-wall transformer. The light source uses an EKZ lamp, which provides upward of 10,000 foot candles of intense cold illumination. The standard Dolan-Jenner nosepiece allows the interface with all Fiber-Lite standard and custom fiber optic light guides. Precise
light level settings are obtained via the 4-position, sold state intensity control switch. The
Model 3100 illuminator is typically used for co-axial illumination in microscopy applications. Available in either single gooseneck or ringlight configurations, the Model 3100 is
Dolan-Jenner's smallest footprint illuminator. (Specifications)
FR-7200 Fluorescent Ring Light
Precise, High-Frequency Lighting for Microscopy Vision Photography
The FR-7200 provides high frequency fluorescent lighting. Special phosphors result in a
brighter 7200° Kelvin fluorescent ring light for enhanced resolution. (Specifications)

 

 

 

 

 

 


 

 

 

 


|Product|Installation Manuals|Press Releases|Trade Shows|
|Sales Offices|Service/Repairs|

|Home|Site Map|About Us|Contact Us|Employment|Search|
 


Dolan-Jenner Industries
159 Swanson Road, Boxborough, MA 01719
Toll Free: (800) 833-4237; Fax: (978) 264-0292